Life on the Water

What is a Windlass on a Canal Boat?

4th November 2026

If you’re reading this, you’ll be researching the parts and functions of canal locks, and how to figure them out. A windlass is one of the tools you’ll use to open and close the paddles on a canal lock, named after an old Norse word meaning ‘winding pole’.  

Even if you’ve never been on a canal boat before, this is a piece of kit you’ll be trained on by our marina team before you set off on your narrowboat break, and it only takes a lock or two to get into the groove of using it. 

How does a windlass work? 

A windlass works by turning the gear that raises and lowers a lock paddle, which lets water flow in or out of the lock.   

Here’s what happens: 

  1. You drop the square socket over the spindle on the paddle gear 
  2. You wind the handle, which lifts the paddle (a small sluice gate below the water) 
  3. Water flows into or out of the lock chamber 
  4. The water level changes and your boat rises or drops with it 


Most paddle gear is either rack and pinion or hydraulic. One rack and pinion gear, a safety catch called a ‘pawl’ clicks into place as you wind, holding the paddle up so it doesn’t slip back down when you lift the windlass off.
 

We teach everyone who holidays with us that the best habit is to wind slowly and keep one eye on the boat so you can see exactly how the water reacts before you open the paddle any further. 

What does a windlass look like? 

A windlass is an L-shaped metal bar with a square socket at one end. It looks like a slightly larger Allen key with a hoop on the end instead. The socket drops over the spindle, and the long arm gives you the leverage to wind it. 

Some windlasses, which are typically made from steel, aluminium or lightweight carbon fibre, have two socket sizes to suit different spindles across the network. You might hear people on the canal network refer to it as a ‘lock key’, but it’s the same tool.

Do you need to bring your own windlass? 

No you don’t have to carry your own windlass. Unless that’s what you’re into. All of our boats come with three windlasses on every short break or longer trip, so you’re prepared for the locks along your route. They’ll be provided with a range of other pieces of equipment, so there’s nothing for the locks you need to buy yourself. 

If you’re ever unsure which gear it fits, your ABC marina team will show you when you collect your boat.  

How difficult is it to use a windlass? 

A windlass isn’t difficult to use, though it does take a little elbow grease and a steady hand. Even the kids can have a go, too, as long as they’re able and supervised. You won’t need to worry about using a windlass if you’re on a lock-free canal route.  

We suggest following these habits to keep you and your boaters safe: 


“Nearly everyone is nervous at the first lock, but after a few goes, it’s easy to feel settled in. We’ll hand you the windlass and show you how to fit it, then it’s all up to you and your boaters to get stuck in,” said Joshua Carmichael, Marine Engineer at ABC Leisure Group.

For the full step-by-step of working a lock, read our guide to operating locks.  

Ready to give it a go? 

The windlass is a part of your canal boat holiday that makes the experience feel so much more tangible and exciting. You don’t have to worry about not knowing how to use one, as you’ll receive a full demonstration in your handover. 

If it’s your first time afloat, read our guide to canal boat holidays for beginners, or browse our low-lock routes to ease yourself in. 

browse routes speak to the team read more
< Back